 |
| RoofMill™ HO-1.4kW (High Output) 1 Rooftop Turbine Wind ONLY |
| 1 complete RoofMill™ Wind ONLY Rooftop Turbine Kit, 24v, HO-Turbine, includes HO Wind Turbine, Blades, Cone, Rotor, Tail, Roofmount Kit, Charge Controller, This is an HO Hybrid ( Wind Only ) Power system. Kit has all required components from turbine to battery charging capability 24v nominal. This is an upgrade kit to add additional HO wind turbine only, to existing RoofMill™ Systems. | | Price: $3.490 ea. - - - Quantity Discount Avail. for 5 or More Units | |
|
|
|
 |
| RoofMill™ HO-1.4kW (High Output) 1 Rooftop Turbine Wind ONLY |
| 1 complete RoofMill™ Wind ONLY Rooftop Turbine Kit, 48v, HO-Turbine Maximum Output 970 watts, includes HO Wind Turbine, Blades, Cone, Rotor, Tail, Roofmount Kit, Charge Controller, This is an HO Hybrid Wind Only Power system with maximum power output of 970 watts. Kit has all required components from turbine to battery charging capability 48v. Customer must add batteries, inverter, and some required wiring. | | Price: $3.490 ea. - - - Quantity Discount Avail. for 5 or More Units | |
|
|
|
Click to enlarge
 |
| 2 Solar Panel Upgrade Kit, 394 watts Solar |
2 Solar Panel Upgrade Kit, includes Roofmount Hardware, 2ea 206 watt rated panels for use with WindEnergy7 Rooftop Wind/Solar Hybrid Kits. Sold as matched plug-n play upgrade kit to existing WindEnergy7 systems. | | Price: $950 ea. - - - Quantity Discount Avail. for 5 or More Units | |
|
|
|
Click to enlarge
 |
| Grid-Tie System Remote Monitoring and Control Module |
| Grid-Tie System Management Remote Monitor & Control Upgrade. This Upgrade Option Provides a display of the operation, status, and provides full control and adjustment of the WE7 Grid-Tie Inverter setpoints. The Remote Monitoring and Control Module also coordinates the operation of the entire system to maximize performance and to prevent multiple products from conflicting. This upgrade only for WE7 Grid-Tie System. | | Price: $260 ea. - - - Quantity Discount Applied for 5 or More Units | |
|
|
|
Click to enlarge
 |
| Side Pole Building Mount Kit |
| Patent Pending Side Pole Building Mount Kit, includes directions, diagrams and all hardware required, except the mast pipe, a section of standard schedule 80 plumbing pipe, which will need cut and drilled, sourced locally by customer. | | Price: $480 ea. | |
|
|
|
Click to enlarge
 |
| Xantrex C60 Charge Controller |
Xantrex/Trace C60 60 Amp, 12 or 24 VDC C Series Charge Controller
Shown with optional CM LCD Digital Display that must be ordered separately (see below).
A Controller for Virtually any DC Charging Source. The C60 is a fully solid state, microprocessor-driven controller that is UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.
Standard Features
Silent Microprocessor Control-All C Series controllers have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently.
PWM Charge Performance
C Series controllers all use Pulse Width Modulation (PWM) charging profiles which are designed to provide a full charge to your battery while, at the same time, minimize gassing which can shorten battery life.
3-Stage Battery Charging
All C Series controllers automatically initiate a 3-stage battery charging cycle. Bulk, Absorption, and Float modes are used to ensure that voltage and current settings accurately match the batteries' actual state of charge. This means fast-as-possible charging and extended battery life. An auto equalize mode can be easily switched off when the controller is used with sealed batteries. C Series controllers are factory set for solar PV battery charging operation.
Field Adjustable
There are a number of field configurable, user adjustments for C Series controllers. C35 and C60's can only be set for 12 or 24 VDC operation. The C40 may be configured for 12, 24 or 48 volt systems. Bulk and Float voltage set points are user adjustable which allows use with a wide variety of battery technologies including; flooded lead acid, gel, and absorbed glass mat. In addition, there are manually selectable settings for Nicad batteries.
DC Load Controller Mode
When used as a load controller, the C Series will automatically turn a DC load on or off at predetermined battery voltage settings. Both LVD (low voltage disconnect) and LVR (low voltage reconnect) set points are user adjustable.
DC Diversion Mode
In this mode, all power, which is not used to maintain a full charge on the batteries, is diverted to a load dump such as water or space heaters. Diversion mode is used to regulate microhydro and wind turbine systems which need a constant load.
LED Status Indicator
A simple to read, multi-color LED indicates operating status and is standard on all C Series controllers.
UL and cUL Listed
C Series controllers are listed by UL to exacting UL 1741 and cUL CSA 22.2 107.1-95 standards. C Series controllers are also CE compliant (European countries) and are designed to CTIK standards (Australia). Their current ratings are "real world" and do not have to be derated to comply with USA NEC 125% overcurrent requirements.
Electrical Specifications
Voltage Configurations: 12 and 24 VDC
Maximum PV Open Circuit Array Voltage: 55 VDC
Charging/Load Current (@ 25C): 60 amps DC
Maximum Peak Current: 85 amps
Maximum Voltage Drop through controller: 0.30 volts
Typical Operating Consumption: 15 ma
Recommended Breaker Size: 60 amps rated 1000% continuous duty
Recommended Wire Size: #6 AWG rated at 90 degrees C
Lead Acid Battery Settings: Adjustable
NiCad Battery Settings: Adjustable
Load Control Mode: Low Voltage Reconnect-Adjustable (sticker provided with unit) all models. User selectable manual or automatic reconnection - includes warning flash before disconnect and provides a "grace" period.
General specifications
Specified Temperature Range: 32-104 degree F (0-40 degree C)
Enclosure Type: Indoor, ventilated, powder-coated steel with 3/4" and 1" knockouts
Dimensions (HxWxD): 10"x5"x2.5" (25.4 x 12.7 x 6.35cm)
Mounting: Vertical Wall Mount
Weight (Controller only): 3.0 lbs (1.4 kg)
Weight (Shipping): 3.5 lbs (1.6 kg)
Warranty: Two years against defects in workmanship and materials
Options
Display Panel: CM, CM/R-50, or CM/R-100 - optional LCD - backlit, alphanumeric display showing battery voltage, DC amperage, cumulative amp hours, and amp hours since last reset - remote includes 50' (15 m) or 100' (30.5 m) cable
External Battery Temperature Sensor: BTS - optional remote battery temperature sensor for increased charging precision
| | Price: $170.00 | |
|
|
|
Click to enlarge
 |
| Xantrex CM Display/Status Panel for C30, C45, & C60 Charge Controllers |
Xantrex CM Display Panel, CM - optional LCD - backlit, alphanumeric display showing battery voltage, DC amperage, cumulative amp hours, and amp hours since last reset.
Xantrex C-Series Meter Display: The C-Series Meter Display is an optional accessory for the C-Series Multifunction DC controllers, compatible to Xantrex C35, C40 and C60.
It provides a digital display of the voltage, current, and amp-hour status for the C-Series Multifunction DC Controller.
The C-Series DVM/C40, replaces the front cover of your C-Series Multifunction DC controllers C35, C40 and C60
The C-Series Meters have three features:
- a Liquid Crystal Display (LCD) to show current, voltage, amperage, resettable amp hours and total amp hours
- an Amp-hour Reset Button, which is also used to illuminate or dim the display
- a Light Emitting Diode (LED) to indicate system status. | | Price: $95 ea. - - - Quantity Discount Applied for 5 or More Units | |
|
|
|
 |
| RoofMill™ HO-4.2kW (High Output) 3 Rooftop Turbine Wind/Solar, Complete Kit (NO INVERTER) |
| RoofMill™ complete Off-Grid Wind/Solar 3 Rooftop Turbine Home Energy Kit, HO-4.2kW, Maximum Output 4200 watts, includes 3 HO Wind Turbines, Blades, Cones, Rotors, Tails, Roofmount Kits, Charge Controllers, 6 Solar Panel Kit, Hardware, and NO Inverter. This is an HO Hybrid Wind/Solar Power system with maximum output of 4200 watts. Kit has all required components. Custom config for existing 24v battery bank & inverter, and has everything but some required wiring. | | Price: $13,890 ea. - - - Quantity Discount Avail. for 5 or More Units | |
|
|
|
 |
| RoofMill™ HO-1.4kW (High Output) Grid-Tie Complete Kit, Ship to South Africa |
| 1 complete RoofMill™ Grid Tied Wind/Solar Rooftop Home Energy Kit, HO-1.4kW, Maximum Output 1400 watts, includes HO Wind Turbine, Blades, Cone, Rotor, Tail, Roofmount Kit, Charge Controller, 2 Solar Panel Kit, Hardware, and Grid-Tie Inverter. This is an HO Hybrid Wind/Solar Power system with maximum power output of 1400 watts. Kit has all required components. Customer must add batteries and some required wiring. FOR EUROPEAN POWER (230v 50hz) INCLUDES INSURED SEA FREIGHT TO SOUTH AFRICA | | Price: $8,200 ea. - - - Quantity Discount Avail. for 5 or More Units | |
|
|
|
|
Click to enlarge
 |
| PSX-240 Transformer Kit |
| PSX-240 Auto Transformer Kit. This is a powerful autotransformer to carry 240v loads like water well and so forth from a 120v system configuration. Enclosure with fan and double brakers included. | | Price: $550 ea. - - - Includes Promotional Discount | |
|
|
|
|
Search
Your cart:
Categories;)
;)
;)
;)
;)
;)